Fully Automatic Cartoning Machine with Stuck
The cartoner machine automatically picks the carton and forms the carton, the worker manually puts the products on the moving conveyor, and when it’s moving to the formed carton, the machine pushes it into the carton, sealing the carton . If you want to save the labor cost, you can add a robot to place the goods on a conveyor instead of one person.
This cartoner mainly suitable for automatic cartoning of small products such as food, medical supplies, toys, stationery, auto parts, cosmetics, hardware, daily commodities, etc.
Cartoning Machine Process:
- Adopt Simens PLC programmable control system,intelligent interface,simple operation.
- Use the servo motor to ensure the machine’s stable performance.
- Speed is from 20~60 carton /min according to carton style.
- Add electric eye to detect the goods so no goods then not pick carton, avoid empty carton.
- With a hand wheel and visual dial gauge, easy change over the different carton size packing.
- Carton store shelf able to store cartons, adjustable frame for different size cartons.
- High carton feeding rate, carton neatness, and folder ensure the future successful goods loading and carton sealing.
- The transmission and friction parts are strictly following the standard implementation, with less wear and tear in the later stage, and reducing the replacement of accessories.
- The machine is equipped with an inverter, PLC, voltage regulator, etc. to ensure the stable operation of the machine.
- Stato light, alarm when machine malfunction or lack cartons.
- E-stop device.Machine’s fully automatic stops working when the machine door is open.
- Full 304 stainless steel, for stable performance.
- For the carton material suggest 250-350g/m2, carton indentation is not less than 0.4mm, with pre folding effect, it’s very important to ensure the smooth carton forming and good loading.
- Machine electrical components can be customized and upgraded according to customer needs.
- Options: A visual inspection machine will detect the defective goods before cartoning.The cartoning machine will fully automatically fill several cartons into cartons, sealing them with tape or straps. End weigher checker can detect the wrong weight carton. Ink printer or label stick machine, stick the goods information on the carton or carton. The palletizing robot will stack the cartons according to your requirements. Filling the instruction book card into carton.
Fully automatic cartoning machine with stuck
220V 50Hz/customized according to your voltage
carton machine 1.1KW
|Carton Size Range
(Able to be customized)
|L200-100 * W160-40 * H80-15 mm
L220-120 * W190-50 * H120-40 mm
If the carton’s width and length are the same, it’s not safe for the machine to open the carton.
|Carton material feeding height||500mm|
|Requirement for carton||250-350g/m2, carton indentation is not less than 0.4mm, with pre folding effect|
- The machine shall be kept clean, often wipe, and lubricate with rotating parts.
- The parts of the drive chain shall be lubricated every 15 ~ 40 working hours. It is recommended to use mechanical oils with the number of 50 (the sport viscosity is 47 ~ 53mm2/S50℃), add grease every three months to gear engagement, and it’s recommended to use calcium-based greases with the number of ZG-1 or ZG-2.
- Synchronous profile belt and transmission tape shall be avoided to contact with oil, so as not to reduce its service life.
- Ensure that the packing machine can work normally and reliably, it shall be stopped every three months to check the tension of the transmission chain and the fixing degree of the transmission components, if necessary, re-adjust and fix.
- In case of faults, carefully analyze the situation, maintenance personnel shall maintain in time, it’s not allowed to adjust and depart the machine without permission to avoid damage to the parts.
1. We provide videos and an instruction manual to show the process of installation.
2. We provide training for installation for free in our factory.
3. We can send a technician to the buyer’s factory to install the machine and provide a training course.
After Sales Service
1. One-year warranty and free lifetime technique support.
2. Free spare parts would be supplied if the machine has broken within the warranty period.
3. After the warranty period, the spare parts for replacement are offered based on a certain charge.