Furniture Kit Link Chain Packing Machine
The machine fully automatically counts different hardware parts and makes a chain bag, the printer will print the different content on each bag, so when your customer receives one set of furniture then just use the link chain bag to install it. You can print the characters, barcode, or Logo according to your design.
Packing Machine Parameter
| Speed | 10-60bag/min |
| Counting range | 0~100000个 |
| Pouch size | （L）40-160、（W）30-110mm |
| Film width | 220mm |
| Film thickness | 0.03~0.10mm |
| Gas consumption | ≥0.03㎡ / min |
| Pressure | 0.5-0.7Mpa |
| Sealing type | chain bag |
| Power | 2000W |
| Net/gross wt | 300kg/400kg |
| Voltage | 220V、380V/50hz/60hz |
| Pack material | OPP/CPP、OPP/PE MST/PE PET/PE |
| Dimension | L1200×W1000×H1600mm |
Hardware Kit Packing Machine Feature
1. According to screw/special parts sample tailored to the vibration plates with a precise count control device, to ensure that every bag is accurate and correct.
2. Adopting a pneumatic structure, the whole machine is more secure, stable, and reliable.
3. Advanced PLC control system and various automatic alarm protection functions, convenient for daily maintenance and reduced wastage.
4. It completes the whole procedure of metering, filling, bagging, date printing, charging(exhausting), and counting automatically.
5. The unique design of the packing seal technology, makes the sealing nice and strong.
6. Equipped with a chain conveyor trailer, it can be fed manually if the vibration plates are unworkable.
Video
Furniture Kit Packing Machine in customer factory
Hardware Packing Machine Manufacturer
Hardware Counting Machine
Nuts Packing Machine
Plastic Cap Packing Machine
Plug Packing Machine
Furniture Parts Feeder
Dowels Packing Machine
Automatic Screws Packing Machine
Nails Packing Machine
Small Plastic Bolts Packing Machine
Different Screw Packaging Machine
Operator interface
About Vibration
This vibration plate is widely used and can be installed on all kinds of vibration plates by center fixed or fixed around. Because the driving parts do not have the coil and iron core, the electrical and mechanical structure is very simple and has good durability.
Main technical parameters
1. Rated voltage of 220 V or 110 V AC, frequency 50 Hz or 60 Hz, the vibration plate uses half wave excitation or full wave excitation according to the need
2. Vibration specification： terminal disk diameter from φ80 to φ1000mm.
3. Vibration plate is divided clockwise and counterclockwise according to the direction of the material.
Feature:
1.No need to adjust the spring sheets
Because through sample controller frequency setting will be able to achieve the desired operational state, when the machine assembly or the electric frequency 50/60 Hz changes, you don’t need to adjust the resonant spring sheets, and there is no secular variation.
2 No electromagnetic influence on parts
Drive parts do not have any magnetic effect on small parts and magnetic parts, are conducive to the selection of the parts.
3. Most suitable for conveying small parts.
Because it is directly driven by spring sheets, the effective vibration is very big, so that they can achieve the jump-free conveying of the tiny parts.
4. Significant energy saving effect
Because the piezoelectric element of the electric-mechanical energy conversion rate is high, it can reach more than 70% of the energy-saving effect compared with the past forms.
5. Shared the 100V and 200V.
By using a dedicated controller, realized the shared of 100V, and 200V.
Engineer Team:
Process :
Customer :
Shipping
Installation Service
1. we provide videos and an instruction manual to show the process of installation.
2. we provide training for installation for free in our factory.
3. we can send a technician to the buyer’s factory to install the machine and provide a training course.
After Sales Service
1. One-year warranty and free lifetime technique support.
2. Free spare parts would be supplied if the machine broke within the warranty period.
3. After the warranty period, the spare parts for replacement are offered based on a certain charge.
