WE-LS1 Versatility Packing Machine/Hardware Counting Packing Machine
A hardware counting packing machine is a type of automated machine that efficiently and accurately counts small hardware components and then packages them into containers or bags. The specific features of a hardware counting packing machine will depend on the manufacturer and the model, but some common features include an adjustable counting head, a bagging unit, a control panel, and various safety features.
Versatility Packing Machine Feature
- It is designed to handle a variety of different types of hardware, sizes, and packaging requirements.
- Adopting a pneumatic structure, the whole machine is more secure, stable, and reliable.
- Advanced PLC control system and various automatic alarm protection functions, convenient for daily maintenance and reduced wastage.
- It completes the whole procedure of metering, filling, bagging, date printing, charging(exhausting), and counting automatically.
- The unique packing seal technology makes the sealing nice and strong.
Packing Machine Parameter
| Speed | 10-60bag/min |
| Counting range | 0~100000pcs |
| Pouch size | （L）40-160、（W）30-110mm |
| Film width | 220mm |
| Film thickness | 0.03~0.10mm |
| Gas consumption | ≥0.03㎡ / min |
| Pressure | 0.5-0.7Mpa |
| Sealing type | Pillow sealing、side sealing with Europe hole or chain bag |
| Power | 1500W |
| Net/gross wt | 250kg/350kg |
| Voltage | 220V、380V/50hz/60hz |
| Pack material | OPP/CPP、OPP/PE MST/PE PET/PE |
| Dimensions | L700×W800×H1600mm |
Packaging Sample
Video
Common Faults And Solutions
| Faults | Cause | Solution |
| The machine did not start | The fuse broken/The power plug did not put on/The emergency stop button still on | Change the fuse/Insert the power plug/Turn off the emergency stop button. |
| Film pull off | The film has gaps and wrinkles; the roller step motor stopped; and the Proximity switch is damaged. Poor contact between lines. Main motor reversal. | Dropping out the no-use film/paper; Replacing the proximity switches, and fixing the lines. |
| The sealing is not strong | A low temperature; the sealer is not straight; the film loading is ugly. | Adjust the temperature or detect the heater, make the sealer straight, and load the film/paper nicely. |
| The pulling wheel not working | The light is on but not working; the dumping power is too weak; the switch is broken. | Make sure the color marker light points to the color spot. |
| The machine stops ERR=05 | No film/paper | Loading new film/paper. |
| The temperature control displays the exception number | The wire of the sealer was in a poor connection | Reconnect or change the sealer |
| The temperature control displays show the temperature does not rise up | The heater or the fuse was broken. | Change the heater or the fuse. |
| The bags do not completely cut off | The knife has an abrasion or it is not straight enough. | Make an adjustment or change the new knife. |
| The bags can not be pulled down | The time setting for the bag pulling is not correct/The bag former got the wrong placement | Reset the cutting time or replace the bag former. |
Daily Maintenance
- Safe first, make sure you operate the machine in a safe situation.
- After production please clean the dust and the rubbish on/inside or around the machine every day.
- Make sure that the machine at a dry place without moisture.
- For the Air booster, please keep it clean without dust and water.
- Make the screws are tied up before producing, especially the screws of the vibration plate.
- Keep the electric eye/color marker and the lights clean, without any dust.
- After a long time using please add gear oil or grease to the engine parts.
- Gearbox No-oil operation is strictly forbidden, running for the first time after a 40-hour, it needs to replace lubrication, then every oil change for three months.
Environment Temperature | Lubricating oil |
-5℃–50℃ | Gear oil – 20 or HL – HL 50 machine oil |
-40℃ | Gear oil – 30 HL or HL – 50 machine oil |
Engineer Team:
Process :
Customer :
Manufacturer
Shipping
Installation Service
1. we provide videos and an instruction manual to show the process of installation.
2. we provide training for installation for free in our factory.
3. we can send a technician to the buyer’s factory to install the machine and provide a training course.
After Sales Service
1. One-year warranty and free lifetime technique support.
2. Free spare parts would be supplied if the machine broke within the warranty period.
3. After the warranty period, the spare parts for replacement are offered based on a certain charge.
Similar Product: Nut Bolt Weighing Machine
