Automatic Shrink Wrap Machines Side Sealers

Automatic Side Sealer Shrink Wrap Machine uses an electronic eye to detect products as they pass through on the conveyor. After products pass, a single-sealing arm running perpendicular to the film closes behind the product. As the product continues to pass to the conveyor, a side sealing wheel makes the final seal enclose the product. The advantage of the side seal machine comes from the ability to wrap longer products. The width of the product is limited to the verticle sealing bar, but the length can be as long as needed. A perfect option for shrink wrapping molding, pipes, wood, and other elongated items.

Description

Automatic Shrink Wrap Machines Side Sealers

Recommended Models Information:

WE-350

Automatic Shrink Wrap Machines|Side Sealers

Model WE-350
Sealing type Side sealing
Power supply 380V/50-60Hz/3phase
Speed Depends on product length
Product size width+height≤400mm
Filling volume Sealing height≤200mm  Packing width≤350mm
Film center-folded polyolefin(POF )film   polyethylene(PE)film
Max film size 580mm(width)x280mm(outer diameter)
Power 10.5KW
Air compressor ≤0.5MPa(5bar)
Gross Weight 600kg
Working height 780-820mm
Sealing system Special durable alloyed sealing knife with anti-stick Teflon coats
Conveyor Conveyor chains with rotating silicon coated rods, speed variable
Machine material Carbon steel
Operating panel Siemens touch screen, PLC, OMRON temperature controller

WE-600

Automatic Shrink Wrap Machines|Side Sealers

Model WE-600
Sealing type Side sealing
Power supply 380V/50-60Hz/3phase
Speed Depends on product length
Product size width+height≤650mm
Filling volume Sealing height≤250mm  Sealing width≤600mm
Film center-folded polyolefin(POF )film   polyethylene(PE)film
Max film size 860mm(width)x280mm(outer diameter)
Power 12.5KW
Air compressor ≤0.5MPa(5bar)
Gross Weight 900kg
Working height 750-820mm
Sealing system Special durable alloyed sealing knife with anti-stick Teflon coats
Conveyor Conveyor chains with rotating silicon coated rods, speed variable
Machine material Carbon steel
Operating panel Siemens touch screen, PLC, OMRON temperature controller

WE-900

Automatic Shrink Wrap Machines|Side Sealers

Model WE-900
Sealing type 4 Sides sealing, full close
Power supply 380V/50-60Hz/3phase
Conveyor speed 15m/min
Product size 400mm≤width+height≤900mm length>250mm
Filling volume Sealing height=300mm  sealing knife width≤600mm
Film Single layer POF or PE film
Max film size 860mm(width)x280mm(outer diameter)
Power Sealer:2.5KW shrink tunnel:28KW
Air compressor ≤0.5MPa(5bar)
Gross Weight 2000kg
Working height 850-900mm
Sealing system Permanently heated seal bar coated with Teflon
Machine material Carbon steel
Operating panel Siemens touch screen, PLC, OMRON temperature controller

Equipment Feature:

  1. The horizontal knife in the sealing part adopts a vertical drive, and the vertical knife adopts a constant temperature side sealer. The sealing line is straight and firm to achieve a beautiful sealing effect.
  2. The constant temperature heating sealing and the cutting system can be used to seal and cut various industrial standard shrink films such as POF. Products with different packaging specifications and sizes can be completed only by adjusting the hand wheel, which increases reliability and is easier to operate.
  3. The vertical knife can do the sealing and cutting action sustainably, and the product length is not limited.
  4. The machine adopts a PLC controller, and the sealing and cutting system can continuously and smoothly perform sealing action without replacement, and the maintenance operation is very simple.
  5. Feeding length control by the combination of electric eye detection and timer, the length of the film is precisely controlled, making the shrinkage effect easier to control.
  6. A total of two sets of horizontal and vertical sensors are installed, which is convenient for switching and selection. For thin or small packages, the sealing and packaging operation can be easily completed.
  7. The automatic handle of the waste material, controlled by a separate motor, will not be too loose or too tight and crack, the waste is easy to disassemble.
  8. Automatic air blowing function can be added according to customer needs.
  9. The front-end power feeding line and rear-end unpowered storage platform can be selected as required.

Machine Details

Sample picture

Drawing:

WE-350 DRAWING

WE-600 DRAWING

WE-900  DRAWING

Video :

Installation Service

1. We provide videos and an instruction manual to show the process of installation.

2. We provide training for installation for free in our factory.

3. We can send a technician to the buyer’s factory to install the machine and provide a training course.

After Sales Service

1. One-year warranty and free lifetime technique support.

2. Free spare parts would be supplied if the machine has broken within the warranty period.

3. After the warranty period, the spare parts for replacement are offered based on a certain charge.

 

Reviews

There are no reviews yet.

Be the first to review “Automatic Shrink Wrap Machines Side Sealers”

Your email address will not be published.